CO2 MIRA 5

MIRA5 is a hobby grade desktop laser engraving machine. The working area is 500*300mm, with water cooler, exhaust fan and air pump built inside of the machine which is very compact,clean and modern. To be an hobby grade model, the water cooler may not be very effective, as it is not compressor type. You can not run it continuously over 4 hours, or the water temperature will be too high.

It is designed more focused on engraving than cutting, therefore, there is no blade cutting table for this model.But that does not mean you could not cut at all. You could cut plywood, MDF, leather, paper with this machine very well. Only that when cuts the acrylic or other plastic materials, better to put some solid flat objects underneath to make the acrylic not contact with the honeycomb table, so that it won’t burn the bottom of the acrylic.

The MIRA5 might be the most powerful hobby machine you could find on the market. The engraving speed is very fast, up to 1200mm/sec. The acceleration speed is 5G. Also, the dust proof guide rail ensure the engraving outcome is perfect. The red beam is the combiner type, which is same with the laser path. Further, you could choose autofocus and WIFI to get easier operation experience.

Overall, The MIRA5 is ideal for those who got limited space and want a best hobby grade desktop laser engraving machine in his/her room.

Advantages of the MIRA5

Faster than others

With Customized stepper motor,high quality Taiwan Linear Guide rail and Japanese bearing, the MIRA5 maximum engraving speed is up to 1200mm/sec, acceleration speed up to 5G, twice or three times faster than ordinary machines on the market.

Clean pack Technology

One of the biggest enemy for laser engraving and cutting machine is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of MIRA protects the linear guide rail from dust,reduce maintenance frequency effectively,get much better outcome.

All-in-one design

All of the laser machines need exhaust fan,cooling system and air compressor.The MIRA5 has all these functions built-in,very compact and clean. just put on table, plug in and play.

AEON Pro-Smart Software

The Aeon ProSmart software is user friendly and it has perfect operation functions. You can set parameter details and operate it very easy. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator and AutoCAD. Further more, it is compatible with both windows and Mac OS!

Mufti-Cummunication

The MIRA5 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.

Effective Table and front pass through door

The MIRA5 got ball screw electric up&down table, steady and precision.Z-Axis height is 10mm, can fit in 10mm height products. The front door can open and pass through longer materials.

Focus more easier

he MIRA5 can install the newly designed Autofocus. The focus for the laser can’t be easier.Just a press with the autofocus on the control panel, it will find its focus automatically.The autofocus device height can be adjustable manually very easy, and it can be install and replace very easy ,too.

Strong and Modern body

The Case is made up of very thick galvanized steel plate, which is very strong. The painting is powder type, looks much better. The design is much more modern, which fits seamlessly in modern house. The LED illumination inside the machine makes it shinning in the dark room like a super star.

Cutting parameters for different materials